ISO NEUTRALIZER (5 GALLON) (ISO-NEUTRALIZER-5 GALLONS)

ISO NEUTRALIZER 5 GALLON BUCKET

*Also available in a 1 GALLON JUG PN# ISO-NEUTRALIZER-1 GALLON 

Protect the investment in your equipment by utilizing ISO Neutralizer. 

 This is a great solution for cleaning the ISO out prior to winterizing or storage. Need help or advice with winterizing? Give us a call at 850-640-0285

 Does Not Meet State of California VOC Compliance, Cannot Be Sold in CA. Non-flammable solvent for pre-flushing. Dynasolve Iso-Neutralizer is a companion product to Dynaloy's safety solvents for urethanes. It is non-chlorinated, non-flammable, non-carcinogenic, and non-ozone depleting. Dynasolve Iso-Neutralizer is used to remove any excess liquid of isocyanates from processing equipment prior to flushing and cleaning processes targeted at removing crystallized isocyanates and cured urethane material. Applications: Dynasolve Iso-Neutralizer is designed for use in isocyanate feed tanks and equipment that contain crystallized isocyanate residue. This pre-flushing step is necessary when it is not possible to drain out all remaining liquid isocyanates from the equipment; usually 2-3 gallons of isocyanates will remain in the tanks. Under these circumstances Dynasolve Iso-Neutralizer is used to flush out the liquid isocyanate prior to the introduction of Dynasolve CU-6. The Dynasolve CU-6 (or other flushing solvent) will be used to remove the crystallized isocyanate or uncured pre-polymer. In addition to flushing out most of the liquid isocyanate, the Dynasolve Iso-Neutralizer will react with any remaining free isocyanates and inhibit gelling. Caution: Do not take internally. Avoid contact with skin and eyes. Keep away from heat and flame. Wear gloves and safety goggles. Use with adequate ventilation. Please refer to MSDS before use or disposal.

Safety Data Sheet